Seahorse Coastal Glass Print – Echoes of the Sea

Creating the Seahorse Coastal Glass Print
Inspired by a visit to the Gulfarium and mesmerized by the gentle movements of seahorses—and the fascinating fact that males share in carrying the babies—the artist envisioned this Seahorse Coastal Glass Print as a whimsical blend of ocean magic and equine elegance. With soft pastel tones, Art Nouveau-inspired details, and swirling Hokusai waves, it was designed to bring serenity and charm to spaces seeking unique coastal wall decor or playful coastal nursery ideas.

Create a harmonious coastal collection by pairing this print with:

• Taking Flight Flamingo Coastal Glass Print – Echoes of the Sea – Adds vibrant movement and joyful energy, perfect for beach house wall art..
  
• Playful Hokusai-Inspired Octopus Glass Artwork – Brings in a fun, dynamic ocean vibe while complementing the seahorse’s soft pastels.– Brings in a fun, dynamic ocean vibe while complementing the seahorse’s soft pastels.
  

Together, these pieces make an enchanting display for nurseries, bathrooms, or as thoughtful beach house gifts.

Installation Guide for Your Echoes of the Sea Coastal Glass Prints


Thank you for choosing Echoes of the Sea, the #1 ranked brand for coastal glass prints! Each of our eco-friendly, Made-in-USA prints—like the vibrant Nautilus & Coral or Serene Turtle—comes with a Wall-Dog™ mounting screw and mounting tape for flexible installation.

Follow these simple steps to display your nautical glass art securely. We offer two methods: screw mounting (ideal for most walls, including masonry and concrete) or tape mounting (great for smooth, non-textured surfaces).

Preparation: Unboxing Your Print

1. Carefully unbox your coastal glass print.
2. Locate the cutout notch next to the word "LIFT" on the foam mount.
3. Gently pry up the glass edge using the notch to release the print from the packing board. Avoid forcing it to prevent damage.

Method 1: Screw Mounting (Recommended for Secure, Permanent Hang)
This method uses the included Wall-Dog™ screw, which installs directly into wallboard, masonry, concrete, brick, or plaster—no anchor needed for most surfaces.

1. Turn the print over to reveal the keyhole carved into the foamcore backing (large and extra-large prints include a metal insert for added reinforcement).
2. Choose your wall spot and gather tools: a Phillips screwdriver (#2). For concrete, masonry, brick, or plaster, pre-drill a hole using a 3/16-inch ANSI masonry bit.
3. Screw the Wall-Dog™ into the wall until it's almost completely flush—the head should protrude just enough (about 1/8 inch) to catch the keyhole.
4. Align the keyhole on the back of the print over the screw head.
5. Gently lower the print until it's seated flush against the wall. The weight will naturally settle the foamcore onto the screw head—do not pull downward forcefully to avoid damaging the backing.

Your oceanic glass print is now securely mounted, ready to add calming coastal wall decor to your space!

Method 2: Tape Mounting (Quick & Removable for Smooth Walls)
Use the included tape for easy, no-tools installation. Do NOT use on wallpaper, freshly painted walls (wait at least 7 days after painting), or textured surfaces without sufficient flat areas for adhesion, as it may not hold properly.

1. Clean the wall where you'll hang the print using isopropyl alcohol (not household cleaners). Let it dry completely for 2-3 minutes.
2. Turn the print over. For small and medium prints: Position the single piece of tape directly beneath the keyhole. For large and extra-large prints: Position the two pieces of tape on either side of the keyhole.
3. Remove the white liner from one side of the tape(s) and firmly press the adhesive side down onto the backing using the palm of your hand (avoid fingertips to prevent cracking the glass).
4. Remove the remaining white liner(s) from the tape. Align and press the print onto the wall—don't worry if it's not level; the tape can be repositioned a couple of times without losing strength.
5. Using the palm of your hand, press firmly on the glass surface directly over the tape area(s) for 30 seconds each. For prints with two tapes, press both spots to ensure secure adhesion.

Enjoy your seaside glass print's vibrant glow—it's now perfectly placed for beach-inspired elegance!

Keep your Echoes of the Sea coastal glass prints sparkling like Florida sands with these simple cleaning tips! As the #1 ranked brand for coastal glass prints, we make maintenance a breeze for your beach house artwork.

Use Windex or any glass cleaner on the surface only—avoid the reverse side to protect the vibrant nautical glass art.

Grab two paper towels or microfiber cloths: spray one with cleaner, keep the other dry. Gently wipe with the wet one, then buff away moisture with the dry cloth for smudge-free shine. All done—it's that easy!

Fun Fact: Glass has been used in art for over 4,000 years, just like our timeless coastal prints bring ancient ocean vibes to modern beachy decor.

Perfect for seaside glass prints in any space, ensuring your eco-friendly oceanic glass prints stay pristine and inviting.

Bring a touch of coastal whimsy to your home by displaying this seahorse coastal glass print in a nursery, beach cottage, or ocean-inspired bathroom. Its soft pastel colors pair beautifully with whitewashed wood accents and airy textiles, creating a soothing and playful atmosphere. Ideal for coastal nursery decor or as a statement piece in a gallery wall of unique coastal wall decor, this print invites calm, creativity, and a hint of seaside magic into any space.