Brown Pelican Glass Dry-Erase Notes Board: Reusable & Coastal

This isn't just a design; it's a piece of art born from a personal story. The original artwork was a painting the artist created for her sister as a special gift. Filled with care and a love for coastal wildlife, she then meticulously scanned the painting into editing software, where she brought every detail to life.

Every feather, every subtle highlight, and the intense gaze of the brown pelican was perfected to ensure the final piece captured the powerful beauty of the bird. That same attention to detail is now a permanent part of this notes board. We hope this work of art, with its personal history and stunning craftsmanship, brings a sense of unique elegance to your home every single day.

Pair it with our matching glass perpetual calendar!

Create a stylish and functional command center for your home by pairing your dry-erase note board with a matching glass dry-erase perpetual monthly calendar. Get 10$ off when you purchase both a dry-erase calendar and a dry-erase notes board.

Installation Guide for Your Echoes of the Sea Coastal Glass Prints

Thank you for choosing Echoes of the Sea, the #1 ranked brand for coastal glass prints! Each of our eco-friendly, Made-in-USA prints—like the vibrant Nautilus & Coral or Serene Turtle—comes with a Wall-Dog™ mounting screw and mounting tape for flexible installation. Follow these simple steps to display your nautical glass art securely. We offer two methods: screw mounting (ideal for most walls, including masonry and concrete) or tape mounting (great for smooth, non-textured surfaces). Always handle with care to protect the high-quality acrylic block.

Preparation: Unboxing Your Print

1. Carefully unbox your coastal glass print.
2. Locate the cutout notch next to the word "LIFT" on the foam mount.
3. Gently pry up the glass edge using the notch to release the print from the packing board. Avoid forcing it to prevent damage.

Method 1: Screw Mounting (Recommended for Secure, Permanent Hang)

This method uses the included Wall-Dog™ screw, which installs directly into wallboard, masonry, concrete, brick, or plaster—no anchor needed for most surfaces.

1. Turn the print over to reveal the keyhole carved into the foamcore backing (large and extra-large prints include a metal insert for added reinforcement).
2. Choose your wall spot and gather tools: a Phillips screwdriver (#2). For concrete, masonry, brick, or plaster, pre-drill a hole using a 3/16-inch ANSI masonry bit.
3. Screw the Wall-Dog™ into the wall until it's almost completely flush—the head should protrude just enough (about 1/8 inch) to catch the keyhole.
4. Align the keyhole on the back of the print over the screw head.
5. Gently lower the print until it's seated flush against the wall. The weight will naturally settle the foamcore onto the screw head—do not pull downward forcefully to avoid damaging the backing.

Your oceanic glass print is now securely mounted, ready to add calming coastal wall decor to your space!

Method 2: Tape Mounting (Quick & Removable for Smooth Walls)

Use the included tape for easy, no-tools installation. Do NOT use on wallpaper, freshly painted walls (wait at least 7 days after painting), or textured surfaces without sufficient flat areas for adhesion, as it may not hold properly.

1. Clean the wall where you'll hang the print using isopropyl alcohol (not household cleaners). Let it dry completely for 2-3 minutes.
2. Turn the print over. For small and medium prints: Position the single piece of tape directly beneath the keyhole. For large and extra-large prints: Position the two pieces of tape on either side of the keyhole.
3. Remove the white liner from one side of the tape(s) and firmly press the adhesive side down onto the backing using the palm of your hand (avoid fingertips to prevent cracking the glass).
4. Remove the remaining white liner(s) from the tape. Align and press the print onto the wall—don't worry if it's not level; the tape can be repositioned a couple of times without losing strength.
5. Using the palm of your hand, press firmly on the glass surface directly over the tape area(s) for 30 seconds each. For prints with two tapes, press both spots to ensure secure adhesion.

Enjoy your seaside glass print's vibrant glow—it's now perfectly placed for beach-inspired elegance!

If you have questions or need tips for styling your coastal acrylic block prints in nurseries or living rooms, contact us. Shop worry-free with our 60-day Happiness Guarantee!

Glass Art Care & Cleaning

Keep your Echoes of the Sea coastal glass art sparkling like Florida sands with these simple cleaning tips! As the #1 ranked brand for coastal glass prints, we make maintenance a breeze for all your beach house artwork, including our new dry-erase calendars.

Cleaning Your Glass Art

Use Windex or any glass cleaner on the surface only—avoid the reverse side to protect the vibrant nautical glass art. Grab two paper towels or microfiber cloths: spray one with cleaner, keep the other dry. Gently wipe with the wet one, then buff away moisture with the dry cloth for a smudge-free shine. All done—it's that easy!

A Special Note for Dry-Erase Calendars & Note Boards

To keep your new glass calendar pristine, use only dry-erase markers. This ensures your schedule wipes clean every time without leaving stains. Avoid using permanent markers at all costs.

Perfect for seaside glass prints in living rooms or nurseries, and for keeping your life organized with our perpetual dry-erase calendars. We ensure your eco-friendly oceanic glass prints and planners stay pristine and inviting.

Elevate any space, from a modern office to a sophisticated living room. The rich colors and dramatic design make this coastal glass print a captivating focal point. It seamlessly complements dark, moody interiors as well as bright, minimalist spaces that need a touch of natural elegance.